18s 12ND610 8 Ohm

18s 12ND610 8 Ohm
419,94 € * 642,60 € * (34,65% gespart)
Inhalt: 1 Stück

inkl. MwSt. zzgl. Versandkosten

Lieferzeit 4-5 Werktage

  • SW10257
The 12ND610 is an extremely high output neodymium mid-bass transducer perfect for high quality... mehr
Produktinformationen "18s 12ND610 8 Ohm"
The 12ND610 is an extremely high output neodymium mid-bass transducer perfect for high quality professional systems. It has been designed for midrange and midbass frequency reproduction in horn-loaded, as well as bass-reflex compact enclosures.
The transducer's extremely powerful neodymium magnet assembly assures high flux concentration, low power compression and excellent heat exchange. The levels of force factor and power handling result in the best power to weight ratio on the market today.
12ND610 curvilinear paper cone has been designed by 18 Sound engineers with a special high-strength wood pulp to achieve the best possible linearity within its intended frequency range and to control bell-mode resonances around the cone circumference.
Its cone is capable of carrying significant loadings thanks to a dedicated reinforcing treatment. The cone is carried by a multiroll suspension built from a linen-like material, which is more resistant to aging and fatigue than traditional materials.
The 75 mm (3 in) state-of-the-art inside outside voice coil is similar to the one fitted to our top-of-the-range 18" and 15" models but it's wound with aluminum wire. It employs the Interleaved Sandwich Voice coil (ISV) technology in which a high strength fiberglas former carries windings on both the outer and inner surfaces to achieve a mass balanced coil.
The final result is an extremely linear motor assembly with a reduced tendency for eccentric behavior when driven hard.
A proprietary humidity-block cone treatment makes the transducer suitable for outdoor use in adverse weather conditions. In addition, a special coating applied to both the top and back plates makes the 12ND610 far more resistant to the corrosive effects of salts and oxidization.


General Specifications

Nominal Diameter 300mm (12 in)
Rated Impedance 8 Ohm
AES Power 450W
Program Power 700W
Peak Power 1500W
Sensitivity 102dB
Frequency Range 80 - 5500 Hz
Power Compression @-10dB 0,7 dB
Power Compression @-3dB 1,9 dB
Power Compression @Full Power 2,4 dB
Max Recomm. Frequency 2000 Hz
Recomm. Enclosure Volume 8 - 40 lt. (0,28 - 1,41 cuft)
Minimum Impedance 4,2 Ohm at 25°C
Max Peak To Peak Excursion 23 mm (0,91 in)
Voice Coil Diameter 75 mm (3 in)
Voice Coil winding material aluminum
Suspension Triple roll, polycotton
Cone Curvilinear, Paper

Thiele Small Parameters

Fs 46 Hz
Re 5,9 Ohm
Sd 0,0531 sq.mt. (82,31 sq.in.)
Qms 4,3
Qes 0,15
Qts 0,14
Vas 94,4 lt. (3,32 cuft)
Mms 49 gr. (0,11 lb)
BL 24 Tm
Linear Mathematical Xmax ± 3,5 mm (± 0,14 in)
Le (1kHz) 1,17 mH
Ref. Efficiency 1W@1m (half space) 100 dB

Mounting information

Overall diameter 315 mm (12,4 in)
N. of mounting holes and bolt 8
Mounting holes diameter 7,15 mm (0,28 in)
Bolt circle diameter 296-300 mm (11,65-11,8 in)
Front mount baffle cutout ø 282 mm (11,1 in)
Rear mount baffle cutout ø 282 mm (11,1 in)
Total depth 124 mm (4,88 in)
Flange and gasket thickness 11,5 mm (0,45 in)
Net weight 3,4 kg (7,51 lb)
Shipping weight 4,6 kg (10.14 lb)
Packaging Dimensions 332 x 332 x 184 mm(13,07 x 13,07 x 7,24 in)
Weiterführende Links zu "18s 12ND610 8 Ohm"
Bewertungen lesen, schreiben und diskutieren... mehr
Kundenbewertungen für "18s 12ND610 8 Ohm"
Bewertung schreiben
Bewertungen werden nach Überprüfung freigeschaltet.

Die mit einem * markierten Felder sind Pflichtfelder.

Zuletzt angesehen