18s ND1460 8 Ohm

18s ND1460 8 Ohm
389,00 € * 595,00 € * (34,62% gespart)
Inhalt: 1 Stück

inkl. MwSt. zzgl. Versandkosten

Lieferzeit 4-5 Werktage

  • SW10276
The ND1460 1.4 inch exit neodymium high frequency compression driver has been designed for use... mehr
Produktinformationen "18s ND1460 8 Ohm"
The ND1460 1.4 inch exit neodymium high frequency compression driver has been designed for use in high quality sound systems. The pure titanium diaphragm is produced in house and has been developed to assure unmatched transient response. The diaphragm assembly is made by joining the former directly to the titanium dome using its upper bend edge. In comparison with a usual straight former joint, the driver design assures extended frequency energy transfer giving improved response linearity and unparallel reliability. This feature facilitates proper motion control of the dome in real working conditions. A proprietary treated Nomex former is used as Nomex shows a 30% higher value of tensile elongation at a working operative temperature (200°C) when compared to Kapton. Moreover, this proprietary former material is also suitable for use in high moisture content environments. By carefully using elementary pieces of neodymium magnets, Eighteen Sound engineers have developed a powerful neodymium magnet assembly capable of reaching 19KGauss in the gap in compact and lightweight structures. The motor structure, throughout the precisely coherent phase plug with 3 circumferential slots and copper ring on the pole piece, reduces inductance effects and distortion. Four top plate air ducts have been designed to act as a loading chamber for the diaphragm, implementing mid band distortion and response figures. The custom designed O-ring creates a tight seal between the plate and the cover assuring air chamber loading. Excellent heat dissipation and thermal exchange are guaranteed by the direct contact between the magnetic structure and the aluminum cover which leads to a lower power compression value. The ability of equipment to perform properly under inclement weather conditions is a key feature of the Eighteen Sound philosophy. Hence, a special treatment is applied to the magnet and the top and back plates of the magnetic structure which increases the ND1460 resistance to the corrosive effects of salts and oxidization. This treatment is more effective than any other treatment in use today.


General Specifications HF

Throat Diameter 35,5 mm (1,4 in)
Rated Impedance 8 Ohm
D.C. Resistance 6,2 Ohm
Minimum Impedance 8 Ohm at 3500 Hz
Le (1kHz) 124 µH
AES Power 100 W above 1,2 kHz
Program power (8) 200 W above 1,2 kHz
Sensitivity (9) 109 dB
Frequency Range 500 Hz - 20 kHz
Recomm. Xover Frequency above 800 Hz (12 dB/octave)
Diaphragm material Titanium
Voice Coil Diameter 75 mm (3 in)
Voice Coil winding material Edge-wound aluminum
Magnet material Neodymium
Flux Density 1,9 T
Bl Factor 13,5 N/A
Polarity Positive voltage on red terminal gives positive pressure in the throat

Mounting information

Overall diameter 132,5 mm (5,22 in)
N. of mounting holes and bolt 4 M6 holes 90° at Ø102 mm (4 in)
Bolt circle diameter 102mm (4 in)
Total depth 62 mm (2,5 in)
Net weight 2,9 Kg (6,39 lb)
Shipping weight 3 Kg (6,61 lb)
Packaging Dimensions 132x132x68 mm (5,2x5,2x2,7 in)
Weiterführende Links zu "18s ND1460 8 Ohm"
Bewertungen lesen, schreiben und diskutieren... mehr
Kundenbewertungen für "18s ND1460 8 Ohm"
Bewertung schreiben
Bewertungen werden nach Überprüfung freigeschaltet.

Die mit einem * markierten Felder sind Pflichtfelder.

Zuletzt angesehen