18s ND2060A 8 Ohm

The ND2060A 2 inch exit neodymium HF compression driver has been designed for high quality sound
systems application. The ND2060A diaphragm assembly is composed by an aluminum dome
sandwiched to a proprietary treated PEN (polyethylene naftalate) suspension. This design maintains
low resonance and lowers the minimum crossover point value at 800 Hz. The composite diaphragm
assembly is made by an aluminum dome strongly joined to the PEN suspension, in order to assure
unmatched transient response. The lower density of the aluminum and PEN structure permits higher
levels of sensitivity, especially in the mid-high frequency range. A bended former edge-wound
aluminum 75mm voice coil completes the diaphragm assembly. The proprietary treated Nomex former
material shows 30% higher value of tensile elongation at working operative temperature (200°C)
when compared to Kapton. Moreover, Nomex is suitable to work also in higher moisture contents
environments. The bended former is joint in a sandwich configuration between PEN suspension and
the aluminum dome, assuring extended frequency energy transfer for improved response linearity
and unparallel reliability. Through careful use of elementary pieces of neodymium magnets, Eighteen
Sound engineers have developed a powerful neodymium magnet assembly able to reach 19 KGauss
in the gap in a compact and lightweight structure. The motor structure, throughout the precisely
coherent phase plug with 3 circumferential slots and copper ring on the pole piece, reduces
inductance effects and distortion. Four top plate air ducts were designed to act as a loading
chamber for the diaphragm, implementing mid band distortion and response figures. The custom
designed O-ring creates a tight seal between the plate and the cover assuring air chamber loading.
Excellent heat dissipation and thermal exchange are guaranteed by the direct contact between the
magnetic structure and the aluminum cover that allows to obtain a lower power compression value.
For the increase in use of high power audio systems at outdoor events or in marine environments,
the ability to perform properly under inclement weather conditions is a key-point. The special coating
applied to the magnet and the top and back plates of the magnetic structure makes the ND2060A
compression driver resistant to the corrosive effects of salts and oxidization.