18s 18W1300 8 Ohm

18s 18W1300 8 Ohm
362,28 € * 547,40 € * (33,82% gespart)
Inhalt: 1 Stück

inkl. MwSt. zzgl. Versandkosten

Lieferzeit 4-5 Werktage

  • SW10375
The 18W1300 is a low frequency loudspeaker which sets a new industry standard in 18" (460 mm)... mehr
Produktinformationen "18s 18W1300 8 Ohm"

The 18W1300 is a low frequency loudspeaker which sets a new industry standard in 18" (460 mm)
high output transducers. It represents a further development of the Eighteen Sound 18LW1400 but
with a lighter mass and increased sensitivity.
The 18W1300 can be used as a low bass or
subwoofer component, in either a reflex, bandpass or horn loaded configuration, in high power fixed
or touring loudspeaker systems. It provides clean, linear, undistorted low frequency reproduction at
very high power levels. In its reflex configuration, it can also be used for bass musical

instrument applications.
The high excursion capabilities of the surround and suspension
system, in conjunction with the Double Silicon Spider (DSS), enable the 18W1300 to achieve high
levels of linear travel while maintaining full control over the moving mass.
The carbon fiber
reinforced curvilinear ribbed cone assures smooth response and exceptional strength with maximum
reliability under high mechanical stress.
The state-of-the-art voice coil employs our own
Interleaved Sandwich Voice coil (ISV) technology, in which a high strength fiberglas former carries
windings on both the outer and inner surfaces. This results in a balanced coil with a uniform
distribution of mass and motive energy, creating an extremely linear motor assembly. The already low
distortion and unmistakable sound quality of this loudspeaker is improved by Double Demodulating
Rings (DDR), designed to dramatically reduce the intermodulation
and harmonic distortion
while improving the transient response.
Excellent heat dissipation has been achieved by
incorporating air channels between the basket and the magnetic top plate.
Maximum flux
concentration and force factor in the gap is assured by the unique shape and design of the top and
back plates, which have been researched and designed using our in-house magnetic flux FEA CAD
resource.
Due to the increasing use of high power audio systems at outdoor events or in
marine environments, the 18W1300 has been designed to perform properly under inclement weather
conditions. This has been achieved using of an exclusive cone treatment which improves pulp
strength and gives water repellent properties to both sides of
the cone. In addition, a special
treatment is applied to the top and back plates which is far more resistant to the corrosive effects of
salts and oxidization than any other treatment in use.

Weiterführende Links zu "18s 18W1300 8 Ohm"
Bewertungen lesen, schreiben und diskutieren... mehr
Kundenbewertungen für "18s 18W1300 8 Ohm"
Bewertung schreiben
Bewertungen werden nach Überprüfung freigeschaltet.

Die mit einem * markierten Felder sind Pflichtfelder.

Zuletzt angesehen