18s 18LW1400 8 Ohm

353,89 € * 535,50 € * (33,91% gespart)
Inhalt: 1 Stück

inkl. MwSt. zzgl. Versandkosten

Lieferzeit 4-5 Werktage

  • SW10377
The 18LW1400 is an extended low frequency loudspeaker which sets an industry standard in 18"... mehr
Produktinformationen "18s 18LW1400 8 Ohm"

The 18LW1400 is an extended low frequency loudspeaker which sets an industry standard in 18"
(460 mm) high performance transducers. It has been designed for use as a low bass or sub-woofer
component, in either a reflex, bandpass or horn loaded configuration, in high power auditorium or
arena loudspeaker systems. The transducer provides clean, undistorted low frequency reproduction
at very high sound pressure levels and is able to withstand high power levels without damage.
18LW1400 design features include a large displacement suspension system which, in conjunction
with a carbon fiber reinforced, straight ribbed cone and the Double Silicon Spider (DSS), assure an
ultra-linear piston action and provide full control across the entire working range. A 100mm copper
voice coil based on Interleaved Sandwich Voice coil (ISV) technology increases this control, providing
high levels of thermal stability and durability. ISV technology is based on a high strength fiberglas
former with half the coil wound on the outside and half on the inside and bonded together using
unique high temperature resin adhesives. Hence, a balanced linear motor unit, exerting an
exceptionally high force factor is achieved. The low distortion and unmatched sound quality of the
18LW1400 has been significantly improved by the Double Demodulating Rings (DDR) embedded in the
pole piece of the magnetic structure. These have been designed to dramatically reduce the
intermodulation and harmonic distortion while improving the transient response. Excellent heat
dissipation has been achieved from the special basket design which incorporates air channels
between the basket and the magnetic top plate. In addition, 8 air vents incorporated into the back
plate are aligned with the voice coil to force air into the lower part of the gap. Maximum flux density
in the gap is assured by the top and back plate design, resulting in a high BL factor. 18LW1400 is
able to perform properly under inclement weather conditions. The exclusive cone treatment improves
pulp strength and gives water repellent properties to both sides of the cone. In addition, the special
treatment applied to top and back plates of the magnetic structure is far more resistant to the
corrosive effects of salts and oxidization.

Weiterführende Links zu "18s 18LW1400 8 Ohm"
Bewertungen lesen, schreiben und diskutieren... mehr
Kundenbewertungen für "18s 18LW1400 8 Ohm"
Bewertung schreiben
Bewertungen werden nach Überprüfung freigeschaltet.

Die mit einem * markierten Felder sind Pflichtfelder.

Zuletzt angesehen